Tristar BL-4010 Manual De Usuario página 5

Operation and maintenance
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz.
Always place the unit on a flat stable surface and ensure at least 10 cm. free space around the
unit. This device is not suitable for outdoor installation or use.
Before First use
Wash before using the device for the first time all supplied loose parts in a warm soapy water.
Rinse and dry thoroughly . These parts are not dishwasher proof.
Caution! Never immerse the base (no. 5) in water or other liquid. Clean the base with a clean
soft, damp cloth.
Beware! The blades of the slicing and chopping disk (no. 7) and the blade chopping (no. 8) are
very sharp, avoid physical contact, you can seriously injure.
Use of the device with the blade chopping
Place the base (no. 5) on a flat stable surface and not near a
sink filled with water or something, make sure the plug is not
placed in the socket and the speed selector (no. 6) on the 0
mode is selected.
Place the bowl (no. 4) on the base and turn it counter clockwise
until you hear a click, otherwise the device will not work for
safety. Place the blade chopping (no. 8). Place the ingredients in
the bowl.
Turn the lid counter-clockwise, on the can and make sure the
appendix of the lid slides in the safety lock, otherwise the device
will not work for safety.
Safety closure.
Use of the device with the cutting and chopping disk
Place the base (no. 5) on a flat stable surface and not near a sink filled with water or
something, make sure the plug is not placed in the socket and the speed selector (no. 6) on
the 0 mode is selected. Place the bowl (no. 4) on the base and turn it counter clockwise until
you hear a click, otherwise the device will not work for safety. Insert the supplied plastic disc
(no.2) in the bowl, place the slicing and chopping disc on the plastic disc. For cutting discs
ensure that the knife is at the top. For grating turn the disc, so that the grating part is at the top.
For slow select mode 1, mode 2 for faster, 0
for disable mode. For a short fast operation,
select the Pulse mode, you should continue
to hold down the switch in this position, due
to possible overheating of the engine. Allow
the unit to cool down before further use.
9
UK Turn the lid with the filling shaft (no. 1), counter clockwise, on the can and ensure that the
appendix of the lid slides in the safety closure, otherwise the device will not work for safety.
Safety closure
Place the cutting and shredding fruits and vegetables in the filling shaft. Always use the
supplied pistil to press the fruit and vegetables into the shaft. Never do this with your hands,
you can seriously injure by the rotating blades. Also do not use other objects, the device may
malfunction.
Always place a large bowl under the eject gap (no. 2), to catch the cut or grated fruit and
vegetables.
Cleaning and maintenance
Always remove the plug from the outlet before storage or cleaning the device
Clean the loose parts in a warm soapy water. Rinse and dry thoroughly . These parts are not
dishwasher proof.
Clean the outside of the device with a clean soft, damp cloth. Never immerse the device in
water or other liquid.
The blades of the slicing and chopping disk (no. 7) and the blade chopping
(no. 8) are very sharp, avoid physical contact, you can seriously injure.
This appendix should be clicked in the safety closure
For slow select mode 1, mode 2 for faster, 0 for
disable mode. For a short fast operation, select
the Pulse mode, you should continue to hold
down the switch in this position, due to possible
overheating of the engine. Allow the unit to cool
down before further use.
10