Berker 7531 00 01 Manual De Instrucciones página 14

GB GB
Connection Connection
The bus line is connected to the bus connecting terminal (1).
The supply voltage and the loads are connected as per fig. A. The
illustration shows the connection of 3 lamps to outputs A 1 – A3 and
A
of 2 motors to outputs A5/A6 and A7/A8 as an example. Further
loads are connected in the same way.
Please observe that the connected loads must be compatible with
the parameterization of the outputs.
The device can be connected to different phase conductors.
Further elements:
(2): manual controls and status indicators
(3): LED A1 – A16 indicate the switching state and the output
selected during manual operation.