Amibot Signature JUNGLE Manual Del Usuario página 5

EN
Operating the robot
button pressed until you hear 2 consecutive beeps (approximately
5 more seconds).
Check that the icon is activated and follow the steps that appear on
your smartphone (if you come across any problems, check the App
Quick Guide provided).
Once the robot is correctly paired to your smartphone, go to its
settings and control it remotely.
NOTE: If the robot is switched off, your mobile app's pairing data may be lost. You
must therefore switch the robot back on and repeat the pairing procedure described
above. The settings that you entered previously will need to be re-entered.
3