Delta MultiChoice 17 Serie El Manual Del Propietario página 5

2
Showerhead and Tub Spout Installation
FOR TUB SPOUT INSTALLATION:
C-1
2
C-2
C-3
C-4
3
Slip-On Installation
copper. Important: If it is necessary to cut the
copper tube, the end must be chamfered free of
screw (2), but do not overtighten.
1
Iron Pipe Installation
Install threaded pipe nipple (1) to extend past
pipe nipple and screw on tub spout.
1
Iron Pipe Installation
Installation of easy-on universal tub spout
Install pipe nipple so that end of nipple projects out
3
Apply plumber tape or pipe dope to pipe threads.
tightening with standard pipe wrench until a positive
seal is implemented. Take care not to damage
1 2
surface.
Copper Sweat Installation
1
adapter to tube taking care to keep solder away
brass adapter. Thread tub/spout onto adapter,
2
and all slack is taken up behind wall.
5
Installation
76652 Rev. F