Publicidad
Idiomas disponibles
Idiomas disponibles
Safety advice
-
Be careful when testing on running engines: loose clothing, tools, accessories can be
caught up in revolving parts of the engine and might lead to serious personal injury or
property damage.
-
Be careful when testing on hot engines: risk of burning.
-
Attach wires and probe heads in such a manner that they will not be caught up by
revolving parts of the engine.
-
Carelessness leads to severe personal injury or property damage. That's why you should
always have a second person to do the testing while the first one is driving the vehicle. The
driver is never allowed to do the testing while driving.
-
Be careful when mounting probe heads next to electrical connections or the car's battery.
The alligator clips are made from a conductive material which might cause short circuits
and/or cable fire.
-
After mounting the probe heads, all wires have to be stripped through the engine bay and
opened windows of the passenger seat. This way you avoid any risk of endangering other
traffic participants.
-
Do not test drive on a highly frequented road.
Testing with one-way amplifier
The one-way amplifier allows a fast and easy testing of the alternator, deflector roll, tension pulley etc.
Battery
Push down the cover of the battery
compartment gently and shove it
backwards. Replace battery.
CAUTION
Check for the correct polarity.
Preparation
Connect the headphones with the one-way
amplifier by plugging in the 3.5mm input
jack into the plug socket at the rear end of
the amplifier.
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
Publicidad
