Philips SilentStar FC9310/01 Manual De Instrucciones página 8

English
8
nozzles and accessories
1 To connect a nozzle or an accessory to the tube, insert the tube into
the nozzle or accessory and fit the spring-loaded lock button into
the opening in the nozzle or accessory ('click').
Note: You can also connect the nozzles and accessories directly to the handgrip
in the same way.
2 To disconnect a nozzle or an accessory from the tube, press the
easy-release button or the spring-loaded lock button (depending on
the type of nozzle or accessory) and pull the nozzle or accessory
out of the tube.
silentseal nozzle
Note: For a silent and powerful cleaning job, always use the SilentSeal nozzle.
The SilentSeal nozzle is a low-noise, multi-purpose nozzle for carpets and
hard floors.
- Use the hard floor setting to clean hard floors (for instance tiled,
parqueted, laminated and linoleumed flooring): push the rocker switch
on top of the nozzle with your foot to make the brush strip come out
of the housing.
- Use the carpet setting to clean carpets: push the rocker switch again to
make the brush strip disappear into the nozzle housing.
Hard floor nozzle (specific types only)
- The hard floor nozzle is designed for gentle cleaning of hard floors.
accessories
1 You can connect the crevice tool (1), the small nozzle (2) or the
small brush (3) directly to the handgrip or to the tube.
- Use the crevice tool to clean narrow corners or hard-to-reach places.
- Use the small nozzle to clean small areas, e.g. the seats of chairs and
sofas.
- Use the small brush nozzle to clean computers, bookshelves etc.