Motor Protection Filter - Philips SilentStar FC9310/01 Manual De Instrucciones

English
12
5 First insert the front of the dustbag holder into the vacuum cleaner
(1) and then press the back into the vacuum cleaner (2).
Note: If no dustbag has been inserted, you cannot close the cover.
6 Push the cover downwards to close it.

Motor protection filter

To guarantee optimal performance, replace the motor protection filter
once a year. You can dispose of the old filter with the normal household
waste.
1 Remove the dustbag holder with the dustbag.
2 Press down the tab at the top of the motor protection filter holder
to release it (1). Lift the filter holder out of the dustbag
compartment (2).
3 Put the new filter in the filter holder.
4 Fit the two lugs of the filter holder behind the ridge at the bottom
to ensure that it fits properly at the top (1). Then press the filter
holder home ('click') (2).
5 Place the dustbag holder with the dustbag back into the appliance
and close the cover.
HEPA 13 filter
The HEPA 13 filter is able to remove 99.95% of all particles down to
0.0003mm in size from the outlet air. This not only includes normal house
dust, but also harmful microscopic vermin such as dust mites and their
excrements, which are well-known causes of respiratory allergies.
Note: To guarantee optimal dust retention and performance of the vacuum
cleaner, always replace the HEPA filter every 2 years with an original Philips
filter of the correct type (see chapter 'Ordering accessories'). You can dispose of
the old filter with the normal household waste.