Topcom BUTLER E600 TWIN Guia Del Usuario página 10

Ocultar thumbs Ver también para BUTLER E600 TWIN:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
Personalize the handset
#
You can delete each entry separately:
To delete all entries at ones:
5 Personalize the handset
Every programmation is confirmed at the end by a double or single long beep. A
double beep confirms the validation of your choice.
5.1
Adjusting the ring volume
Handset ring volume internal/external calls
The handset ring volume for internal or external calls cannot be set separately. You can choose
from High, mid, low and "OFF".
5.2
Choosing the ring melody
Each handset can ring with a different melody. The handsets can ring with a different melody
according to whether the call is internal or external. You can choose from 8 different ringer
melodies:
10
3 Press the '*' key to see the telephone number.
If the telephone number is longer than 12 digits, press the '#' key again to see
the complete number.
4 Press the left menu key to add this entry to the phonebook if it's not already
stored. Press OK when "ADD TO PB" is shown on the display. 
Enter or modify the name and press OK. 
Enter or modify the telephone number and press OK. 
Select the melody (1-8) which will be heard when this number is calling.
Press OK, the entry will be stored in the phonebook.
5 Press the off-hook key to call back a correspondent, when his telephone
number or name is displayed.
1 Scroll to the call you want to delete and press the left menu key.
2 Select "DELETE" and press OK.
1 When you are in the call list press the left menu key.
2 Select "DELETE ALL" and press OK.
3 Press OK again to confirm.
1 Enter the menu by pressing the left menu key.
2 Select "HS SETTINGS" and confirm.
3 Select "RING SETUP" and confirm.
4 Select "RING VOLUME" and confirm.
5 Select a volume (HIGH, MID, LOW or "OFF").
6 Confirm or return to the previous menu.
1 Enter the menu by pressing the left menu key.
2 Select "HS SETTINGS" and confirm.
3 Select "RING SETUP" and confirm.
4 Select "INT RING" to change the internal melody or "EXT RING" to
change the external melody and confirm.
5 Select a melody (1 to 8).
6 Press the OK key to confirm or return to the previous menu.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Butler e600 tripleButler e600 quattro

Tabla de contenido