Navigating The Menu; Using The Telephone; Switching The Handset On/Off; Changing The Menu Language - Topcom BUTLER E600 TWIN Guia Del Usuario

1.6

Navigating the menu

The Butler E600 has a menu system which is easy to use. Each menu leads to a list of options.
Display menu keys:
Display menu keys are located directly under the display (3) (15). The functions of these keys
change depending on the operation mode. The functions are described below:

2 Using the telephone

2.1

Switching the handset on/off

2.2

Changing the menu language

2.3

Receiving a telephone call

To take the call:
2.4 Making an external telephone call
Direct dialing

Pre-dialing

1 To open the menu or to select more menu options.
2 To confirm the current selection.
3 To make an internal call with other handsets.
4 To go back in the menu selection or to cancel the current operation.
5 To clear a character or stop the alarm. Or to mute/unmute the microphone
during call.
1 Press and hold the on/off key on the handset for 3 seconds. The handset will
search the base.
2 Press and hold the on/off key for 6 seconds. The display will go off.
1 Enter the menu by pressing the left menu key (15).
2 Select "HS SETTINGS" and confirm.
3 Select "LANGUAGE" and confirm.
4 Select a language and confirm.
1 Press the off-hook key.
OR
Lift the handset off its base if you have activated "Automatic answer".
(See "5.3 Automatic answer")
You are connected to your correspondent.
2 Press the on-hook key to hang up or put the handset back on the base.
1 Press the off-hook key to start the call.
2 Dial the telephone number.
3 Press the on-hook key to hang up or put the handset back on the base.
1 Dial the telephone number.
2 Press the off-hook key to start the call.
3 Press the on-hook key to hang up or put the handset back on the base.
4 To correct a number use the delete key to delete an entered digit.
Using the telephone
7