Getting Started; Installing The Base - Topcom BUTLER E600 TWIN Guia Del Usuario

1 Getting started

Thank you for purchasing this product. This product has been designed and assembled with utmost
care for you and the environment. Because we at TRISTAR like to think of the future of our planet
and our children, we aim to do our best to help saving the environment. This is why we decided to
reduce the number of pages of our user guides and product manuals. If you keep in mind that it takes
up to 24 trees to produce 1 ton of paper, publishing product manuals in 21 languages
costs our planet a lot of trees. In this short manual provided with your device you can
find a brief explanation of how to install and use your device.
If you would still like to discover all the features of your new device, please visit our
website (www.tristar.eu) where you can download the complete user manual in your
language. By doing this TRISTAR hopes to do its share to make our planet a better place,
but we can only succeed with your help!
1.1

Installing the base

For installation, do the following:
1 Plug one end of the adaptor into the outlet and the other end into the adaptor jack on the back of
the base.
2 Connect one end of the telephone cord with the wall phone jack and the other end to the bottom
of the base.
3 Put the telephone- and AC power line cord in the base guides as shown on picture 1A.
1.2 Installing the handset
1 Open the battery compartment as shown on picture 1B.
2 Insert the batteries respecting the polarity (+ and -).
3 Close the battery compartment.
4 Leave the handset on the base unit for 20 hours.
E n g l i s h
A
B
C
A
- 1A Back view of base -
A. Power cable
B. Telephone wall outlet
C. Telephone cord
- 1B Back view of handset -
A. Cover
B. Rechargeable batteries
B
Getting started
5