Operating Instructions - Leister VULCAN SYSTEM Manual De Instrucciones

Operating Instructions

GB
Congratulations on purchasing a VULCAN SYSTEM !
You have chosen a top-class hot air blower by Leister, made from high-quality materials. Every VULCAN
SYSTEM undergoes stringent quality checks before leaving the factory in Switzerland.
Please read operating instructions carefully before use
and keep for future reference.
Hot air blower
VULCAN SYSTEM
Application
The hot air blower VULCAN SYSTEM is suitable for building into machines, installations or appliances and
is designed for continuous operation.
Its most important applications include; drying and heating, thawing, accelerating and removal, sterilising,
smoothing, polishing, activation and dissolving, separating and fusing, shrinking, removal.
16
Warning
Danger of death when opening the device, as live parts and connections are expo-
sed. The device must be fully disconnected from the mains before opening it.
Incorrect use of the hot air blower can present a fire and explosion hazard
especially near combustable materials and explosive gases.
Danger – can cause burns! Do not touch the heating element tube and nozzle
while they are hot. Allow the device to cool. Do not direct hot-air stream towards
people or animals.
Caution
The nominal voltage indicated on the device must correspond to the mains
230
voltage. EN 61000-3-11; Z
400
electricity supply utility.
Devices of protection class I must be earthed with a protective earth conductor.
The device must not be left unattended when in use.
Heat can reach combustible materials which are out of sight. The device may only
be used by trained personnel or under their supervision. Children may not use the
device under any circumstances.
Keep away from wet and damp areas.
(Translation of the original operating instructions)
= 0.044 Ω + j 0.028 Ω. If necessary, consult your
max