Step 1: Connect Cameras; Connect Cameras Directly To The Nvr (Recommended) - Lorex N844 Serie Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Setup step 1
IMPORTANT: Test your cameras prior to selecting a permanent mounting location by
temporarily connecting the cameras and cables to your NVR using one of the following two methods.

1. Connect cameras directly to the NVR (recommended)

Connect the Ethernet cable to the camera and then connect the other end of the Ethernet cable
to the NVR's PoE ports. The camera may take a minute to power on after being connected.
— Connect cameras
Camera's Ethernet connector
NVR's PoE ports
3

Publicidad

Tabla de contenido
loading

Tabla de contenido