Step 1: Connect Cameras; To Connect Cameras Directly To The Dvr - Lorex D871B Serie Guía De Configuración Rápida

Setup step 1
IMPORTANT: Test your cameras prior to selecting a permanent mounting location by
temporarily connecting the cameras and cables to your DVR.

To connect cameras directly to the DVR:

1. Connect the extension cable's male power head and BNC connector to the camera.
2. Then connect the other end of the BNC connector to a video input on your DVR.
3. Connect the female power head to the included power adapter.
— Connect cameras
Power adapter
BNC connector Video input
3