Maintenance; Filters; Disassembling / Reassembling Filters - Rowenta PURE HOME Serie Manual De Instrucciones

4. After 15 seconds, the homepage is displayed with
the advice to launch a purification if the air quality is
anything except « excellent »
5. To get more detailed information on the level of
Particles & Allergens, or Gas & VOCs, press
6. Replug the box on the air purifier by pushing both sides
and launch a purification if needed/wanted.
All the following features are unavailable when you are in measurement mode, with the air quality box
unplugged :
- AUTODAY, AUTONIGHT & ALLERGEN modes
- Historic function
Important : the alert light (3) will be flashing when the air quality box is unplugged and the user is
trying to set the autoday, autonight or allergen modes, as they are not available in measure mode.

6. MAINTENANCE

Always switch the appliance off and unplug it before conducting any maintenance operation.
You can clean the appliance with a slightly damp cloth.
IMPORTANT: Do not use any abrasive materials, as these may damage the surface of the product.

FILTERS

This appliance is equipped with 4 types of filters:
Prefilter
Frequency of cleaning/replacing the filters :
Filter
Pre-filter
3-in-1: Prefilter & Active carbon filter & Allergy14 + filter
NanoCaptur+ filter
12
M E AS U R E M O D E
Excellent
See the details
M O D E M EA S U RE
Particles
Gas & VOCs
& allergens
127 127
AQI AQI
43%
Active Carbon Allergy14 filter NanoCaptur+
filter
Action Cycles
Clean Every 2 to 4 weeks
Replace Every 12 months
Color changing
Replace
(see Color chart on filter)
These figures are based on tests in which the air purifier is used for 8 hours per day in silence mode, for 10 months.
The recommended frequency for cleaning and replacing the filters may vary depending on the duration of use and
the operating environment. Refer to the app and the Air Quality Box to get exact information on when to change
your filters.
You may need to replace the filters more often depending on the air quality and how often the air
purifier is used. When one of the filters arrives at the end of its life (3-in-1 filter) OR needs to be checked
(NanoCaptur+ filter) OR needs to be cleaned (pre-filter), an alert will appear on the air quality box main
screens. You will also receive a notification on your mobile application.
Important! When an alert
click on it or check your mobile application in order to know which filter has to be cleaned/replaced.
The pre-filter can be cleaned with a dry cloth.
Important: Resetting the filter
After replacing the filter, click on the alert
Or go into settings directly.
Performing a force reset:
If you replace a filter before the end of its lifespan, go into settings by pressing 3 seconds on the
navigation button. Select 'filter management' and follow the instructions to reset the filter.
To replace the filters, follow these instructions :

DISASSEMBLING / REASSEMBLING FILTERS

1
5
« TIPS FOR CHANGING FILTERS »
filter
• Avoid handling used filters if you suffer from allergies or asthma.
• Wear gloves and a mask when changing the filters, and wash your hands well afterwards.
• Put used filters directly into a closed, air-tight bag before throwing them away with your
household waste to avoid spreading pollutants.
about filter saturation pops up on the screen of the air quality box, please
and follow the instructions to reset the filter.
2 3
6 7
EN
4
8
13