Maintenance & Cleaning; Filter Replacement - Rowenta ECLIPSE QU506 Serie Manual De Instrucciones

Button Function Description
ON/OFF
Auto OFF: The appliance will shutdown automatically after 12h without
manipulation.
Manually set fan speed, heater target temperature, timer and delayed start.
Multi-angle oscillating switch of 30°,60°, 90° and 0°.
Press to activate the fan function. By default the product will be in Auto
mode.
Press + or – to switch to manual mode.
Press to activate the heater function. By default the product will be in Auto
mode.
Press + or – to switch to manual mode. The maximum operating
temperature is 35°C.
Press once to activate the Auto day mode :
• When in fan function, the fan speed will adjust according to
the ambient temperature of the room thanks to the integrated
thermostat (speeds 1 to 12).
• When in heater function, the target temperature is 21°C. The
product is in standby when the temperature is reached.
Press twice to activate the Auto night mode :
• When in fan function, the fan speed is adjusted decrescendo
(speeds 3 to 1) and the light is off.
• When in heater function, the target temperature is 19°C and the
light is off. The product is in standby when the temperature is
reached.
Press once to activate the timer.
Timer:
Then press + or - to program the automatic shutdown from 1h to 12h.
When the appliance is OFF , press the button to program the
Delayed start:
delayed start, then, press + or - to turn on the appliance from 1h to 12h
later.
Long press (3s) to reset the filter. The bip sound indicates that
Filter reset :
the reset has been completed.
The decoration light is blue in fan mode, and red in heater mode. Press
once to turn it on, press twice to turn it off.
NB : on the first use, the product default setting is fan function in auto mode.
When plugged, the product will save its last mode after each use.
WARNING
- Never cover the appliance, it may cause overheating in both heater and fan modes.
- In case of overheating, switch off and unplug the appliance to let it cool down.
- Once the appliance cooled down, you can re-plug it and use it again.
12
MAINTENANCE & CLEANING
Always switch the appliance off and unplug it before conducting any maintenance or cleaning
operation.
Use a damp cloth to clean the surface of the product.
Important: Do not use any abrasive materials, as these may damage the surface of the product.

Filter replacement

1 Filter model: XD6520F0
(including 2 sets)
3 Replace a new filter
Forced reset:
If you have replaced a filter before its end of life, force the reset of the filter replacement cycle:
Hold the timer button for 3 seconds. (beep sound).
IMPORTANT: it is recommended to change the filters as soon as the replace filter alert
indicator is triggered to avoid a product malfunction.
2 The indicator is lighted when the particle filter
needs to be replaced.
4 Long press the timer button for 3 seconds to
turn off the indicator light for filter replacement.
EN
13