Tabla de contenido
Publicidad
Rapier 48w Switch
Rack-mount the switch
1.
Ensure the rack has sufficient space for the switch and its cables. For the
switch's requirements, see
2.
Install cage nuts, if required, so they are ready for the rack-mount screws in
the following steps. The Rapier 48w can be front, center, or rear mounted.
3.
Unpack the switch.
4.
Screw one bracket to each side of the switch using the M4 screws provided.
5.
Mount the switch into the rack, and tighten the 4 rack-mount screws.
8
All manuals and user guides at all-guides.com
"Selecting a Site" on page
6.
Publicidad
Tabla de contenido
