Guide To Features (Front Panel)
1. VOLUME: Turn the volume knob to the right to increase the volume or to the left
to decrease the volume. This knob will also control the volume of headphones (not
included) when connected. If the volume ever sounds distorted, reduce the level to
prevent damage to the speaker.
2. SOURCE KNOB: Turn the knob 1 click to the right to select the FM band, 2 clicks to
the right to select the AM band, or 3 clicks to the right to select the auxiliary input.
To activate Bluetooth, switch to the Auxiliary position and follow the steps outlined in
the "Bluetooth Operation" section.
3. TUNING DIAL: Turn the analog tuning dial to the right or to the left to change the AM
and FM frequency range.
4. POWER LIGHT: Glows green when the Source knob is in any position other than Off,
except when the Alarm button is activated.
5. TUNING INDICATOR: Brightest when best tuning has been achieved. Some listenable
AM stations will not light the tuning indicator and should be tuned by ear for the
clearest signal.
6. ALARM: Once you have set the wake-up time
using the Alarm Thumbwheel, push this button in
to activate the alarm and the corresponding green
LED will light. The LED will remain lit until the Alarm
button is turned off. Push the Alarm button out to
deactivate the alarm and the LED will extinguish.
7. SLEEP: Turn the source knob to AM or FM, set
the radio to a station you wish to fall asleep to and
adjust the volume to the desired level. Press the
Sleep button and the corresponding green LED
will light. The radio will turn off automatically after
approximately 20 minutes. The LED will remain lit
until the Sleep button is turned off.
6 – ENGLISH
10
8
SLEEP OFF
SLEEP ON
7
5
1
4
ALARM OFF
ALARM ON
6
2
3
9
Tiv oli Aud io
1 2
1 1
1
1 0
2
9
3
FM
8
4
OFF
5
7
6
M O D E L T H R E E
AM
AUX