ENGLISH
IMPORTANT
SAFETY
INSTRUCTIONS
For indoor use only.
Regularly check the cord, the
transformer and all other parts for
damage. If any part is damaged the
product should not be used.
Important information! Keep these
instructions for future use.
CAUTION!
The light source of this product is
non-changeable light diodes (LED).
Do not disassemble the product, as
the light diodes can cause damage to
the eyes.
Do not immerse in water.
Cleaning
Use a damp cloth, never a strong
cleaning agent.
ENGLISH
WARNING
Deviation from the assembly
instructions may result in a risk of fire
or electric shock.
2
ENGLISH
CAUTION
To reduce the risk of fire, electric
shock, or injury to persons: Use only
insulated staples or plastic ties to
secure cords. Route and secure cords
so that they will not be pinched or
damaged when the cabinet is pushed
to the wall. Not intended for recessed
installation in ceilings, or soffits. The
low-voltage portable cabinet light
may be installed inside or under
a kitchen cabinet or other built-in
furniture when:
1. The low-voltage Class 2 power
supply is located outside the cabinet
and is not concealed; and
2. The line voltage power supply
cord is not concealed or run through
openings in the cabinet, walls,
ceilings, or floors. This requirement
does not apply to the wiring between
the cabinet light and the power unit.
The National Electric Code (NEC) does
not permit cords to be concealed
where damage to insulation may go
unnoticed. To prevent fire danger, do
not run cord behind walls, ceilings,
soffits, or cabinets where it may
be inaccessible for examination.
Cords should be visually examined
periodically and immediately replaced
when any damage is noted.
AA-2208197-1