Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
The National Electric Code (NEC) does
not permit cords to be concealed
where damage to insulation may go
unnoticed. To prevent fire danger, do
not run cord behind walls, ceilings,
soffits, or cabinets where it may be
inaccessible for examination. Cords
should be visually examined periodi-
cally and immediately replaced when
any damage is noted.
ENGLISH
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK, EX-
POSURE TO EXCESSIVE UV RADIA-
TION, OR INJURY TO PERSONS
IMPORTANT
SAFETY
INSTRUCTIONS
LIGHTED LAMP IS HOT!
WARNING! To reduce the risk of FIRE,
ELECTRIC SHOCK, EXPOSURE TO EX-
CESSIVE UV RADIATION, OR INJURY
TO PERSONS:
1 Turn off/unplug and allow to cool
before replacing bulb (lamp).
2 Bulb (lamp) gets HOT quickly! Only
contact switch/plug when turning on.
2
3 Do not touch hot surfaces like lens
guard or enclosure.
4 Do not remain in light if skin feels
warm.
5 Do not look directly at lighted bulb
(lamp).
6 Keep lamp away from materials that
may burn.
7 Use only with a 25 W or smaller
bulb (lamp).
8 Do not touch bulb (lamp) at any
time. Use a soft cloth. Oil from skin
may damage bulb (lamp).
9 Do not operate the unit with a miss-
ing or damaged guard, lamp contain-
ment barrier, or UV filter if applicable.
ENGLISH
WARNING
Deviation from the assembly instruc-
tions may result in a risk of fire or
electric shock.
AA-321399-1
Publicidad
