Shark Rocket AH452 Instrucciones página 19

STEP 5
5 The brushroll can be
rinsed under running
water. Let the brushroll
air-dry completely before
replacing in the vacuum.
STEP 6
6 To reassemble, hold the
brushroll by the endcap
and align the other end
with the gear. With the
endcap facing up, place
the brushroll in the floor
nozzle.
STEP 7
7 Close the brushroll garage.
Listen for a click and make
sure the release buttons
are fully closed.
NOTE: The brushroll will only spin
if the brushroll cover is fully closed
and locked.
s h a r kc l e a n . c o m 18