Technical Data; Product Properties - Hilti IC-BLE Manual De Instrucciones Original

3.3 Items supplied
Wireless remote control, receiver module, securing screw (2 of), rubber band for attachment, operating
instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Bluetooth
®
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and any use
®
of such marks by Hilti Corporation is under license.
Bluetooth is a wireless data transfer system by which the two Bluetooth-enabled products can communicate
with each other over a short distance.
The Hilti Bluetooth module comes paired ex-works to the accompanying remote control unit and automati-
cally establishes the connection when switched on.
3.5 BLE-Mute function
The BLE-Mute function temporarily interrupts wireless communication between remote control unit and the
receiver module installed on the vacuum cleaner. Activate this mode for transport in aircraft, for example,
and for working in facilities such as hospitals.
→To activate the BLE-Mute function: Press the ON/OFF operating button and hold it down for 10 seconds.
→To deactivate the BLE-Mute function: Press the ON/OFF operating button and hold it down for 3 seconds.
Deactivating the BLE-Mute function automatically triggers pairing mode to restore the paired wireless
link between remote control unit and receiver module.
3.6 Signals issued by LED indicator
Both remote control unit and receiver module have an LED indicator that can issue signals indicative of
various operating states.
The LED in the remote control unit also lights up when you press the ON/OFF operating button.
The following LED signals can occur:
LED signal
Remote control unit or receiver module:
LED does not light up
Receiver module:
LED pulsates (approx. 2-second interval)
Remote control unit or receiver module:
LED quick-flashes
4

Technical data

4.1

Product properties

Use only electrical energy sources with limited power (ES1 PS1) in accordance with IEC 62368-1.
*2321964*
Meaning
Option A: BLE-Mute function is activated.
Option B: Button-cell battery state of charge is too low or
the receiver module is not correctly installed in the vacuum
cleaner.
Remote control unit and receiver module are paired and
functioning correctly.
This state is the normal operating mode.
Pairing mode is active.
Remote control unit and receiver module are paired ex-
works. The signal indicating normal operating mode appears
directly on initial start-up.
2321964 English 11