Maintenance Instructions - Bulldog 182701 Manual De Instrucciones

NEVER ATTEMPT TO MOVE DROP LEG HANDLE WHEN THERE IS ANY LOAD ON THE JACK. DOING SO COULD CAUSE
SPRING RETURN DROP LEG WILL NATURALLY RETRACT VERY QUICKLY.
NON-SPRING RETURN DROP LEG WILL NATURALLY FALL. KEEP CLEAR OF MOVING DROP LEG.
SPRING RETURN DROP LEG OPERATION:
1) Verify that the jack is not supporting any load.
2) If extended, place your foot on foot plate to control the
return of the drop leg.
3) Disengage drop leg pins by rotating handle to the disen-
gaged position.
4) Carefully move the drop leg to the desired position using
your foot.
5) Engage drop leg pins by rotating handle to the engaged
position and into the desired adjustment holes.
6) Verify that the drop leg pins are fully inserted into the jack
by checking for no clearance between the handle and the
cam slot of the housing. If you see clearance, you must
adjust the drop leg to fully seat the pins into the hole loca-
tions. If you are unable to fully engage the handle, DO
NOT USE.
The following procedures should be performed at least annually unless noted otherwise: Gears, bushings, and screw of the jack must be kept lubri-
cated. For side-wind models; apply a small amount of automotive EP2 grease with a grease gun at lubrication points found on the side of jack near
the input shaft. Rotate jack handle to distribute the grease evenly. A lightweight oil must be applied to the input shaft bushings at sides of the jack or
gearbox. For top-wind models; the screw-stem should be lubricated with a light-weight oil. The twin cam mechanism must be kept clean and lubri-
cated at least monthly. Apply a lightweight oil at all oil points and apply automotive EP2 grease at cam slots.
Oil
Grease
EP2
Use only Cequent Performance Products' parts or parts of equal quality for repair. Replacement parts are available through Cequent Performance
Products' Customer Service Department, 1-800-521-0510. Please specify product model number.
Limited Warranty. Cequent Performance Products, Inc. ("We" or "Us") warrants to the original consumer purchaser only ("You") that the product
will be free from material defects in both material and workmanship for a period of five years, ordinary wear and tear excepted; provided that
installation and use of the product is in accordance with product instructions. There are no other warranties, express or implied, including the
warranty of merchantability or fitness for a particular purpose. If the product does not comply with this limited 5 year warranty, Your sole and
exclusive remedy is that We will replace the product without charge to You and within a reasonable time or, at our option, refund the purchase
price. This warranty is not transferable.
Limitations on the Warranty. This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a
result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation, including welds; (d) improp-
er maintenance and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant
to product instructions and in a workmanlike manner.
Obligations of Purchaser. To make a warranty claim, contact Us, at our principal address of 47774 Anchor Ct. W., Plymouth, MI 48170, 1-800-521-
0510, identify the product by model number, and follow the claim instructions that will be provided. Any returned product that is replaced or
refunded by Us becomes our property. You will be responsible for return shipping costs. Please retain your purchase receipt to verify date of pur-
chase and that You are the original consumer purchaser. The product and the purchase receipt must be provided to Us in order to process Your
warranty claim.
Remedy Limits. Repair or replacement is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not be
liable for service or labor charges incurred in removing or replacing a product or any incidental or consequential damages of any kind.
Assumption of Risk. You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product in-
structions is at Your own risk.
Governing Law. This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. This lim-
ited warranty is governed by the laws of the State of Michigan, without regard to rules pertaining to conflicts of law. The state courts located in
Oakland County, Michigan shall have exclusive jurisdiction for any disputes relating to this warranty.
Drop Leg Operation Instr uctions
THE TRAILER TO MOVE SUDDENLY.
NON-SPRING RETURN DROP LEG OPERTION:
1)
2)
3)
4)
5)
6)
Maintenance Instr uctions
Oil
How to Order Instr uctions
Limited Five Year War ranty
Verify that the jack is not supporting any load.
If retracted, grasp the handle of foot plate to control
the fall of the drop leg.
Disengage drop leg pins by rotating handle to the
disengaged position.
Carefully move the drop leg to the desired position
using your hand.
Engage drop leg pins by rotating handle to the en-
gaged position and into the desired adjustment holes.
Verify that the drop leg pins are fully inserted into
the jack by checking for no clearance between the
handle and the cam slot of the housing. If you see
clearance, you must adjust the drop leg to fully seat
the pins into the hole locations. If you are unable to
fully engage the handle, DO NOT USE.
Grease EP2
Twin
Cam
(See note 6)
Grease
EP2
Oil (Same
as opposite side)
Plymouth, MI 48170 USA
800/521-0510
www.cequentgroup.com
Oil