General Description; Extent Of The Delivery; Functional Description; Overview - Parkside POF 1200 B2 Traducción Del Manual De Instrucciones Original

and over may only use the device under
adult supervision.
The device is not designed for commercial
use.
The manufacturer cannot be held liable for
damage when the appliance is not used
in conformity with its intended purpose or
due to incorrect operation.

General description

The illustrations are on the
front and back foldout pages.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Router Cutter
- Suction adapter with 2 recessed head
screws
- Reducer piece
- Parallel stop with 2 guide bars
- Collet chuck 6 mm
- Collet chuck 8 mm (preassembled)
- Template guide
- Centring tip
- 6-part cutter set
- Combination wrench with long hole
- Allen key
- Instruction Manual

Functional description

The router cutter is a power tool equipped
with rotating cutting tool (milling cutter)
and a baseplate. The stepless rotation
speed control, the steplessly adjustable
depth stop, and the dust suction enable
comfortable working.
Refer to the following descriptions for a
functional description of the controls.

Overview

Machine:
1 Left handle
2 Rotary knob for milling depth ad-
justment
3 Hand wheel for rotation speed
preselection
4 Power cable
5 Switch block
6 On/Off switch
7 Right handle
8 Cap nut
9 Retaining screw
10 Baseplate
11 Sliding plate
12 Drill holes for suction adapter
13 Collet chuck 8 mm, preassembled
(not visible)
14 Step limit
15 Guide rail
16 Spindle locking button
17 Depth stop
18 Locking screw of depth stop
19 Tightening lever
Accessories:
20 Suction adapter
21 2 recessed head screws
22 Collet chuck 6 mm
23 Centring tip with butterfly nut
24 Parallel stop
25 Template guide
26 Ball race
27 Combination wrench with long hole
28 Allen key
29 2 guide bars
30 Reducer piece (dust suction)
6-part cutter set:
31 Profile cutter (25 mm, R 4 mm)
32 Rounding cutter (22 mm, R 6.3
mm)
33 V-notch cutter (12.7 mm, 90°)
34 Notch cutter (12 mm)
35 Notch cutter (6 mm)
36 Fillet cutter (22 mm, R 6.3 mm)
GB MT
57