Application; Preparation - INQUA BR021000 Manual Del Usuario

APPLICATION

Preparation

36

The compressor is designed for use with the supply voltage print-
ed on the type identification plate. If the compressor is plugged
into a mains socket with a different supply voltage, the compres-
sor may be damaged.

To avoid the hazard of an electric shock, unplug the mains plug
from the socket immediately
- if a malfunction occurs during operation,
- before cleaning and maintaining the appliance,
- after each use.

Do not run the power cord over sharp edges, or allow it to be
pinched or hang unsupported. There is a risk of electric shock if
the compressor is operated with a damaged power cord.

Do not attempt to make any conversions or unauthorised addi-
tions to the product, because this will impair the product's operat-
ing reliability.

Store and operate the inhalation device only in places where it is
supported firmly and cannot fall. Because of the weight of the
inhalation device, it represents a danger to anyone or anything
below it if it falls.

Use only accessories recommended by INQUA to operate the
®
INQUA Inhalator. Operational reliability and the success of the
treatment may be compromised if accessories from other manu-
facturers are used.

Never leave the compressor unsupervised while it is in operation.

The compressor is not protected against sprayed water. Protect
the compressor, the power cord and the power plug from liquids
and moisture.

Please follow the instructions for use of the accompanying
nebuliser as well!

Check that the compressor housing, the power cord and the
power plug are in perfect condition before each inhalation
session.
WARNING: Danger of electric shock if compressor is damaged
®
The INQUA Inhalator is designed so that the user is protected from
live parts. In a faulty device, this protection may be rendered
ineffective.

If the compressor, the power cord or the power plug is visibly
damaged, or if you suspect that there is a fault, do not operate the
®
INQUA Inhalator under any circumstances. Disconnect the
power plug from the socket immediately and notify the manufac-
turer (see back of instructions for use) or your sales partner.