Completing The Inhalation - INQUA BR021000 Manual Del Usuario

NOTE:
To ensure perfect
functioning of the com-
pressor, the device
must be at room tem-
perature before it is
put into operation.
Completing the
inhalation
NOTE:
The power plug must
be disconnected from
the socket to ensure
that power is com-
pletely cut off.
Fig. 4

Fill the nebuliser as described in the instructions for use of the
nebuliser.

Pull the nebuliser up and out of its holder.

Switch the compressor on at the ON/OFF switch (8). The
nebuliser will now generate a clearly visible aerosol mist.

Perform the inhalation as described in the instructions for use of
the accompanying nebuliser.
The inhalation session is complete when no more aerosol is pro-
duced by the nebuliser.

Place the nebuliser back in its holder.

Switch the compressor off.

Disconnect the power plug from the mains socket.

Clean the compressor (see Chapter "Cleaning, maintenance,
repair", Section "Cleaning operations", page 42).

Prepare the nebuliser and the mask for hygienic re-use as
described in the instructions for use of the nebuliser.

Wind up the power cord in a clockwise direction on the bottom of
the compressor.

When they have dried, stow the parts in the storage compartment
of the compressor.
®

Keep the INQUA
reach of children (see Chapter "Miscellaneous", Section
"Storage", page 45).
Inhalator in a dry, dust-free place out of the
en
41