Storage; Troubleshooting - INQUA BR021000 Manual Del Usuario

Storage

TROUBLESHOOTING

44
Keep the compressor and all accessories out of continuous direct
sunlight.
Do not leave the compressor connected to the mains when storing
because all electrical devices that are connected to mains electricity
represent a potential hazard.
Fault
The compressor
does not start.
No aerosol is coming
out of the nebuliser.
Please contact your local sales partner or the manufacturer

if the motor is unusually loud,

if the device switches off automatically after a few seconds,

if no compressed air is generated.
Possible cause
The power plug is not
plugged into the mains
socket correctly.
The nebuliser nozzle is
blocked.
The connection tubing
is not connected
correctly.
The connection tubing
is leaking.
Procedure
Check that the power
plug is plugged into the
mains socket correctly.
Clean the nebuliser.
Check that the tubing
connections are at-
tached correctly.
Replace the connec-
tion tubing.