Specifications & Part Identification - FT ICEHOME Ficha Técnica Libro De Servicio

2. SPECIFICATIONS & PART IDENTIFICATION
The appearance or product specification can be changed without prior notices in order to enhance its quality.
Model:
Dimensions:
(height x width x depth)
Weight:
COLD:
Power:
Temp. Control:
Cold/heat exchanger:
Performance:
Allowed incoming pressure:
Allowed water temperature:
Allowed ambient temperature:
Relief valve pressure:
1. Inlet
2. Outlet
3. Cold water thermostat
4. Motor fan
5. Cold/heat exchanger
UPPER
FRONT
Specifications
IceHome
410 x 290 x 210 mm
12 kg
120 W
Thermostat with adjustable knob
1.8 l (made of stainless steel)
4,5 l/h (10 ºC)
140 - 400 kPa (20-58 psi)
5 - 40 ºC (41 - 104 ºF)
5 - 40 ºC (41 - 104 ºF)
690kPa (100 psi) ±15%
Part identification
6. Compressor
7. Condenser
8. Power cord
9. Drain cap
10. Drain cover
1 2
7
15
WARNING: This chiller is designed
to operate at incoming water pres-
sure from 140 to 400 kPa (20 - 58
psi). The manufacturer accepts no lia-
bility for damage caused by excessive
water pressure.
BACK
5
9
10
3
4
6
8