Components; Correct Use - MeisterCraft MES 220 E Traducción De Las Instrucciones De Servicio Originales

MC-5460210-Bediene-1111_MC-5460210-Bediene-1109.qxd 24.11.11 13:50 Seite 55
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the
disturbance must be made whilst
taking account of the actual
conditions of use. (All parts of the
operating cycle must be taken into
account for this purpose. This also
includes times in which the tool is
switched off and times in which it is
switched on, but is running without
load.)
3 – Components
1 Tool locking switch
2 Tool holder
3 Stroke-speed selector
4 ON/OFF switch
5 Housing
6 Mains cable
7 Scraper
8 Spatula
9 Universal knife
10 Firmer chisel
4 – Correct use
Applications
Removal of wall and floor coverings.
Removing remainders of paint and
adhesive. Smoothing of bumps. Carving
work on soft woods. Any other
applications are expressly excluded. When
using insert tools, the manufacturer's
instructions, instructions for use, etc.
must be observed.
ATTENTION! The tool is not
suitable for loosening tiles and
wooden cladding!
This tool is only intended for use in a
domestic environment.
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and without
the appropriate knowledge, unless they
are supervised by someone who is
responsible for their safety or have been
instructed by such a person with regard
to how the unit is to be operated.
Children should be supervised to
ensure that they do not play with the
device.
ATTENTION! Any change to the
machine other than the proper
use will invalidate the guarantee.
Improper use of the product
All applications carried out with the
device that are not listed in the "Proper
use" chapter will be considered
improper use.
Uses for which the tool is not designed
may cause risks and injury. Do not use
accessories that are not intended
specifically for this electrical tool.
Just because you can affix an
accessory to your electrical tool, there is
no guarantee it is safe to use.
The permitted revolutions of the tool
insert must be at least as high as the
highest value specified on the electrical
tool. Accessories that turn faster than is
permitted may break and fly off.
There is a risk of injury. The user of the
device is liable for all property and
personal damages occurring as the
result of incorrect use.
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
55