Tools And Materials; Before You Begin - Kohler K-4737 Guia De Instalacion

Tools and Materials

Adjustable
Wrench
Plus:
Plastic Wrap
GFCI or RCD Electrical Outlet
Damp Wash Cloth (optional)
Grounding Adapter with Cover Screw (optional)

Before You Begin

WARNING: Risk of electric shock, fire, or personal injury.
This product must be grounded and connected only to a
dedicated, nominal 120 VAC, 60 Hz circuit protected by a
minimum 15 A Ground-Fault Circuit-Interrupter (GFCI) or
Residual Current Device (RCD). If the product is not
grounded or a higher voltage circuit is used, electric shock,
fire, or personal injury may occur.
WARNING: Risk of electric shock. Do not immerse or flush
the product with water.
NOTICE: Do not plug in the seat until instructed to do so. This will
avoid possible product malfunction.
NOTICE: Do not install this seat in a location where: (1) water
might be splashed on the product or (2) excessive moisture, high
humidity levels, or condensation are present. This will avoid
damage to the electronic components.
NOTICE: Do not use an extension cord with this product.
Observe all local plumbing, electrical, and building codes.
Only connect the water supply from the seat to a cold water
supply providing water of drinking quality and a pressure of
20-80 psi (139-551 kPa).
All information in these instructions is based on the latest product
information available at the time of publication. Kohler Co.
reserves the right to make changes at any time without notice.
1097712-2-A
Flat-Blade
Screwdriver
2 Kohler Co.