Tools And Materials; Before You Begin - Kohler K-3092 Guia De Instalacion

Ocultar thumbs Ver también para K-3092:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Tools and Materials

Square
Measuring
Tape
Safety
Drill
Glasses

Before You Begin

CAUTION: Risk of personal injury. Mirrored cabinets are
very heavy. Get assistance lifting the cabinet.
CAUTION: Risk of electric shock. Connect only to a circuit
protected by a Ground-Fault Circuit Interrupter (GFCI).
NOTICE: Risk of product or property damage. Each shelf can
support a maximum load of 34 lbs (15.4 kg).
Observe all local building codes.
If installing multiple components (cabinet, countertop, lavatory,
etc.) read all product installation instructions before beginning.
Install some components before others. Refer to the lavatory or
wall mount cabinet Homeowners Guide for sample configurations
and all necessary components.
Install sufficient bracing when installing this product in an area
with unfinished walls or in conjunction with other components in
the same Kohler Suite. When installing this product in an area
with a finished wall, use the wall anchors supplied for
installation.
Remove the cabinet from its carton and inspect for damage.
If installing bracing, do not complete the finished wall until
braces for each component in your installation have been
installed.
Confirm the contents of the box; shelving, mounting "Z" bar, and
hardware. The hardware bag should contain:
1011414-2-E
#2 Phillips
Pencil
Screwdrivers
Level
Adjustable
Wrench
2
2x4 Lumber
Masking
Tape
Kohler Co.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

K-3093

Tabla de contenido