How To Order Parts - FULTON XLT Instrucciones De Montaje

1. Make sure the battery is fully charged and your vehicle is running before use
2. Use vehicle's parking brake and chock wheels of trailer.
3. To raise the trailer off the ball, open the coupler and push "EXT" on switch. This
will extend the jack. The drop leg may also be used to quickly extend the jack.
Make sure to reattach the lynch pin or plunger pin assembly through both sides of
the jack tube after adjusting the drop leg to the desired level.
4. To lower the trailer on to the ball, push "RET" on switch. This will retract the
jack. After the coupler has fully engaged the ball, continue retracting the jack
fully. Be sure to close the coupler. After full retract, you may need to raise the
drop leg also. Make sure to reattach the lynch pin or plunger pin assembly
through both sides of the jack tube after adjusting the drop leg to the desired level.
5. To function the LED light, use the light switch labeled "ON" and "OFF".
6. If for any reason electric power is lost, remove the cap on top of the plastic cover.
Use a 9/16" socket with a ratchet wrench to operate the manual override crank to
raise or lower the jack.
To install:
1. Attach trailer to tow vehicle. Use vehicle's parking brake and chock wheels of trailer.
2. Remove lynch pin and drop leg from jack assembly.
3. Align grooves of jack tube and plunger pin assembly together and slide over bottom of jack
tube (Fig. 2).
4. Retract plunger pin, slide plunger pin assembly onto jack. Check to see that pin passes
through both sides of tube.
5. Install drop leg (Fig. 3).
6. With plunger pin through both holes of jack tube, tighten clamp to jack and torque to 15-20 ft
-lbs. After tightening, make sure plunger pin and drop leg operate freely.
7. Reattach jack to trailer according to the installation instructions above.
8. If your trailer has a weight distribution kit attached, check for any interference to avoid any
damage during operation.
The XLT jack motor is sealed and maintenance-free. It is important to maintain the electrical system including the battery and charger (not included).
Ensure all connections are tight and free of corrosion and that the jack is properly grounded. Make sure the battery is fully charged prior to use. If neces-
sary, wash with mild soap and water and rinse thoroughly. Do not direct a high pressure spray at the XLT Jack. Periodically oil pins of the plunger pin
assembly.
Use only Horizon Global Inc. parts or parts of equal quality for repair. Replacement parts are available through Horizon Global Inc. Customer Service De-
partment, 1-800-632-3290 Please specify product model number. Please visit www.cequentgroup.com.com for additional details.
Limited Warranty. Horizon Global Inc. ("We" or "Us") warrants to the original consumer purchaser only ("You") that the product will be free from mate-
rial defects in both material and workmanship for a period of five years for FULTON® products and one year for the Pro-Series® products, ordinary
wear and tear excepted; provided that installation and use of the product is in accordance with product instructions. There are no other warranties, express
or implied, including the warranty of merchantability or fitness for a particular purpose. If the product does not comply with the applicable limited year
warranty, Your sole and exclusive remedy is that We will replace the product without charge to You and within a reasonable time or, at our option, refund
the purchase price. This warranty is not transferable.
Limitations on the Warranty. This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a result of
any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation, including welds; (d) improper maintenance
and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant to product instructions
and in a workmanlike manner.
Obligations of Purchaser. To make a warranty claim, contact Us at 47912 Halyard Dr. Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the prod-
uct by model number, and follow the claim instructions that will be provided. Any returned product that is replaced or refunded by Us becomes our prop-
erty. You will be responsible for return shipping costs. Please retain your purchase receipt to verify date of purchase and that You are the original con-
sumer purchaser. The product and the purchase receipt must be provided to Us in order to process Your warranty claim.
Remedy Limits. Repair or replacement is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not be liable
for service or labor charges incurred in removing or replacing a product or any incidental or consequential damages of any kind.
Assumption of Risk. You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product instruc-
tions is at Your own risk.
Governing Law. This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. This limited
warranty is governed by the laws of the State of Michigan, without regard to rules pertaining to conflicts of law. The state courts located in Oakland
County, Michigan shall have exclusive jurisdiction for any disputes relating to this warranty.
Horizon Global Inc.
Operation
Plunger Pin Kit Assembly
Plunger pin assembly

How to Order Parts

Limited War ranty
Removable
Cap
Extend/
Retract Jack
Light Switch
Manual
Override
Bolt
Manual Override Crank Access
Fig. 2
Groove
Maintenance
47912 Halyard Dr. Suite 100
Plymouth, MI 48170 USA
www.cequentgroup.com
Fig. 3
Drop leg
800/632-3290