Ec Declaration Of Conformity - BLACK&DECKER GKC1820L Traducción De Las Instrucciones Originales

You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Batteries
At the end of their useful life, discard batteries with
due care for our environment:
Do not short-circuit the battery terminals.

Do not dispose of the battery(s) in a fire as this may

result in a risk of personal injury or an explosion.
Run the battery down completely, then remove it from

the tool.
Batteries are recyclable. Place the battery(s) in a

suitable packaging to ensure that the terminals cannot
be short-circuited. Take them to any authorised repair
agent or a local recycling station.
Technical data
Voltage
No load chain speed
Weight
Battery
o V a t l e g
Capacity
Type
Charger
Input voltage
Output voltage
Output current
Guaranteed sound pressure level measured
according to EN60745:
L (sound pressure) 78.6 dB(A), uncertainty (K) 3 dB(A)
pA
L (sound power) 89.6 dB(A), uncertainty (K) 3 dB(A)
wA
Vibration total values (triax vector sum)
according to EN 60745:
Vibration emission value (a
uncertainty (K) = 1.5 m/s²
GKC1820L H1
Vdc 18
-1
min 190
kg 2
BL1518
V c d 8 1
Ah 1.5
Li-Ion
905902** TYPE 1
Vac 100-240
Vdc 8-20
mA 400
)= 0.62 m/s²,
h

EC declaration of conformity

MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
GKC1820L
Black & Decker declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN60745-1, EN60745-2-13
2006/42/EC, Chain Saw, Annex IV
KEMA Quality B.V., Utrechtseweg 310, 6802 ED Arnhem,
The Netherlands
Notified Body ID No.: 0344
Level of sound power according to 2000/14/EC
(Article 13, Annex III):
L (measure sound power) 89.6 dB(A)
WA
L (guaranteed sound power) 90 dB(A)
WA
These products also comply with directive 2004/108/EC
& 2011/65/EU. For more information, please contact
Black & Decker at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of Black
& Decker.
Kevin Hewitt
Vice-President Global Engineering
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
28-02-2013
ENGLISH
13