Promowide SP1190A Manual De Usuario página 5

Power LED
OPERATION
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with. The green LED on the transmitter will light up.
2. Select the channel 1 or 2 of the transmitter for best performance in your
location.
3. Turn on the ON/OFF button on the speaker. Press the "AUTO TUNE" button to
get the best tuning reception in the speaker. When the button is pressed,
frequency tuning starts automatically and it stops when a signal is detected.
4. Volume can be adjusted up by pressing "+" button or down by pressing the
button "-" to the desired listening level.
P.4
DC Jack