Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL SPECIFICATIONS
Transmission Mode
Carrier Frequency
Operation Voltage
Frequency Response
Distortion
S/N Ratio
Operation Distance
Speaker
Output Power
Storage Conditions
Operation Conditions
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
:
UHF
:
900 MHz Digital Hybrid
:
Transmitter, DC 12V 150mA
Speaker, built-in lead acid rechargeable battery
or DC 15V 1A adaptor
:
40Hz – 12KHz
:
1%
:
65dB
:
Up to 150 feet
:
2-way
:
100Watts (PMPO)
:
Put the speaker indoor if
1) Heavy downpours
2) Snowing
3) Temperature below 14 F, over 122 F
At temperature below 122 F, over 14 F
:
P.7
Publicidad
Tabla de contenido
