Promowide SP1190A Manual De Usuario página 7

TROUBLE SHOOTING
NO SOUND
Ensure the AC/DC adaptor is fully inserted into the AC outlet and the
-
power connection input on the transmitter.
Ensure the speaker is switch ON.
-
Speaker's battery capacity is low, connect the AC/DC adaptor to the
-
speaker.
Ensure the TV or audio component is ON.
-
The volume of speaker is too low, adjust the volume to an appropriate
-
level.
DISTORTED
Press the "AUTO-TUNE" button on the speaker until matching the
-
frequency of the transmitter.
Change the position of the channel selector on the transmitter. Press the
-
"AUTO TUNE" button on the speaker.
Ensure the volume level of speaker is adjusted properly.
-
The speaker is too far away from the transmitter, move it closer.
-
The audio input level of the audio signal is too low. Turn up the volume of
-
the audio source equipment.
The audio input level of the transmitter is too high, lower the volume of
-
the audio source equipment.
P.6