EN
General safety information
- Before initial use, perform a visual inspection
of the device to check for damage.Prior to
use any damage must be repaired by a qualified
expert or workshop.
- Do not charge any damaged, defective or
deformed power packs.
- Do not charge any third party power packs.
- Never try to charge non-rechargeable
batteries.
- Do not cover the ventilation slits of the
charger. Otherwise the charger may overheat and
no longer function correctly.
- Repairs must only be performed by a qualified
expert or workshop.
The device is intended for charging power packs authorised by the manufacturer.
Authorized power packs are indicated in the CE declaration of conformity (enclosed).
Any other use is classed as an unintended use. The user is liable for any damages
arising from unintended use.
Position
The identification plate is located at the charger casing.
Note
The identification is considered as a document. It must never be altered or
obliterated.
14
Safety information
Intended use
Identification plate
Meaning of the symbols