Operation - Wolf Garten LY COS 40/430 QC Manual Del Usuario

Operation

Layout
MTD Products AG
Industriestraße 23
D-66129 Saarbrücken
LYCOS 40/430 QC
49XXXXXX650
XXXXXXXXXXX
AC/DC Charger
Input: 100-240V~ / 240W / 50-60Hz
Output:
Operation
Injuries or material damage.
¾ Observe the mains voltage.
¾ The power source voltage
must match the information
on the device identification
plate.
Note
The power pack becomes hot
during operation.
Charging A
Plug the charger into a suitable
Î
socket 1.
3 The LED goes red.
Plug the power pack into the
Î
charger 2.
3 Charging starts and the LED goes
green.
Note
The charging times depend on the
variant of the battery:
Power
80 % charge
pack
2.5 Ah
approx. 40 min.
5.0 Ah
approx. 55 min.
7.5 Ah
approx. 80 min.
42V / 4,3A / 3A
T5,0A
XXXX
CAUTION!
100 % charge
approx.
65 min.
approx.
105 min.
approx.
140 min.
1 CE label
2 Manufacturer
3 Model name
4 Serial number
5 Rated input voltage, kind of current /
rated power
6 Only for indoor use
7 Rated output voltage / current type
8 Read the instruction manual
9 Protection class
10 Model number
11 Type of device (charger)
12 Mains frequency
13 Rated output current
14 Fuse
15 Disposal instruction
16 Year of manufacture
LED charge state indicator
LED status
Steady red
Flashes green
Steady green
Quick flashing red
Slow flashing red
Steady red
Note
To protect the power pack and
ensure a long service life, the
charger switches off as soon as
the power pack is fully charged.
¾ Store the power pack and charger
separately.
Meaning
Mains voltage is con-
nected but the power
pack has not been
inserted.
Charging.
Charging completed.
Power pack possibly
defective. Arrange for
testing of the power
pack by a specialist
workshop.
Power pack too hot or
too cold. Charging starts
automatically if the
operating temperature is
correct.
Power pack is not
charging. Power pack is
not correctly inserted or
the contacts are dirty.
Note
EN
15