Rohs Compliance; Weee Compliance; Battery Disposal - 3M Elixair SkyMill Manual De Seguridad Y Funcionamiento

• E xcessive force or use may cause the SkyMill Revolution to overheat and/or short circuit. In short circuit
situations, the battery pack will turn off the device. In this instance, plug in the SkyMill Revolution power
supply until fully charged before re-use.
• If the tool does not operate properly, return the tool and charger to Elixair International Ltd. for repair.
Refer to the "3M WARRANTY" section for details, or contact your local dealer.

1) RoHS Compliance

This product and the associated component parts (excluding the battery pack) are "RoHS Compliant"
and do not contain any of the substances in excess of the maximum concentration values in EU Directive
2002/95/EC, as amended by Commission Decision 2005/618/EC and other amendments issued as of the
date of manufacture. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge
and belief based on information provided by third party suppliers to 3M.

2) WEEE Compliance

At the end of its useful life, this product pursuant to European Directives 2002/96/CE
+ 2003/108/CE and its implementation in national law, must not be released into the
environment or thrown away as domestic waste, but must be disposed of at authorized
recycling centres (contact the relevant local authorities for a list of places where the
product may be disposed of according to the law). Disposing of the product correctly
contributes to protecting human health and safeguarding the environment.

3) Battery Disposal

The SkyMill Revolution is equipped with a Nickel Metal Hydride rechargeable battery pack. Any defective
or spent batteries should not be disposed as unsorted municipal waste in land fill sites. They should be
disposed through the local recommended collection and recycling rules.
TROUBLESHOOTING
9