Charging The Battery - 3M Elixair SkyMill Manual De Seguridad Y Funcionamiento

Before using the SkyMill Revolution please read these instructions carefully.

1) Charging the battery

The SkyMill Revolution is supplied with a partial charge. Use the SkyMill
Revolution power supply to fully charge the SkyMill Revolution before use.
2) Light Status
Green:
Amber:
Amber flashing:
Red flashing:
Red flash (slow pulse):
3) Attaching the safety strap
Thread the strap through the mounting plate and secure.
CAUTION: To prevent personal injury or equipment damage,
the safety strap should always be used.
4) Turning on the SkyMill Revolution
Switch on the SkyMill Revolution using the power button at the top of the
product. The light will illuminate green to show that the SkyMill Revolution
is ready to use.
OPERATING INSTRUCTIONS
Standby / ready to use
Charging
Fully charged
High load on motor
Low battery
7
1
2
3
4