Belkin TuneBase F8Z136-BLK Manual Del Usuario página 9

Storing and Using Presets
1. To store a preset, select the desired frequency using "▲" or "▼" buttons.
Press and hold the desired preset button (1, 2, 3, or 4) for two seconds. An
audible beep sounds when the new frequency is programmed*. The iPod nano
display reflects the change when the memory button is released by showing
which memory button was pressed followed by the frequency saved in that
memory position.
* Do NOT remove the iPod nano from the cradle until it returns to the Main Menu
screen or new settings may not be saved.
2. To select a preset frequency, momentarily press "1", "2", "3", or "4". This instantly
tunes the FM transmitter to the frequency stored in that preset.
�������� �� ��� ���� ���� �������� �� ��� ���� ����
������ ��� ���� ���� ������ ��� ���� ����
5357_F8Z136eaBLK_man.indb 9
All manuals and user guides at all-guides.com
Frequency display
Frequency selector
Memory station
display
Memory stations 1 - 4
IntroductionStoring and Using Presets
EN
| 09
16/1/07 9:40:19