Important - ARIETE MULTIVAPORI MV6.10 Instrucciones Para El Uso

EN
The manufacturer cannot accept any liability for damage cause through improper
or incorrect use of the appliance.
• When the appliance is not in use, always lock the steam dispensing button with
the special cursor.
• If the steam button is pressed before the boiler has reached the optimum tempera-
ture, then water instead of steam could come out of the nozzle.
• Never touch hot surfaces while using the product. Leave attachments to cool
before replacing them.
• Even when the appliance is not in operation, unplug it from the power mains
and leave it to cool before inserting or removing single parts or before
cleaning it.
IMPORTANT: danger of scalds
Ÿ
NEVER OPEN THE CAP ON THE BOILER TANK DURING USE.
IMPORTANT: Before unscrewing the cap on the boiler tank, proceed as follows:
ü switch off the appliance at the main switch and
ü bleed out the remaining pressure from the boiler tank,
ü leave the appliance to cool for a few minutes;
ü slowly loosen the boiler tank cap, part of the way
ü unscrew the cap completely and remove it.
IMPORTANT possible damage to materials
• Before using the product, make sure that all items, surfaces and fabrics to be
cleaned are resistant to or compatible with the high temperature of the steam.
Specifically, treated terracotta flooring, wooden surfaces or delicate fabrics, such
as silk or velvet, should not be treated without first consulting the instructions from
the manufacturer and carrying out a test on a small hidden sample part.
WARNING danger of scalds
unplug the power cord from the mains socket;
using the steam button on the gun and
pointing the jet into a suitable container;
and wait for a few seconds;
- 14 -