Joolz Positive Design Modo De Empleo página 23

Note: P lease check availability of items included on the sticker of
the box for special or limited editions of the Joolz Day.
2. Assembling the Joolz Day
1. Unfolding the chassis – figures 1-2
To unfold the Joolz Day pull up the handlebar (1) with one hand
until you hear a click.
2. Attaching the rear wheels (pneumatic tires) – figures
3-4
Attach the rear wheels to the axle of the chassis by pushing in the
button (10) in the middle of the rims until they click into place.
3. Removing the rear wheels
Press the button in the middle of the rim (10) and pull
the wheel off the axle.
Note: M ake sure that the wheels are secure and check
the tire pressure. If necessary, inflate the tires.
The maximum tire pressure is 28 P.S.I. (2.0 bar).
4. Attaching the front wheels (swivel wheels) – figure 5
The front wheels (11) are simple to attach. Click the front wheels
into the front wheel holders on the front forks.
7. manual_NL_UK_DE_ES_IT_CR_FR_jan 2015.indd 23
5. Locking the front wheels – figures 6-7
Press down the clip above the front wheels (13) with your foot to
lock the front wheels. The pushchair will only move in a straight
line. Pulling this clip upwards releases the front wheels. The front
wheels will swivel again, making the Joolz Day easy to manoeuvre.
6. Removing the front wheels – figures 8-9
The front wheels can be detached by pushing the button on the
front of the front wheel holder (12).
7. Applying the brake – figure 10
The brake is situated on the bar between the rear wheels (9). Press
the pedal down with your foot to apply the brake. To release the
brake, press the other side of the pedal down again with your
foot.
Note: A lways hold the stroller firmly on sloping surfaces even if
the brake is engaged.
8. Attaching the shopping basket – figures 11-13
To attach the shopping basket (24) first place it over the brake and
attach the four straps between the rear wheels using the push
buttons. Then, connect the two straps in the middle. Finally fix
the two straps in the front using the velcro strips.
EN
| instruction manual 23
03-03-15 17:17