Joolz Positive Design Modo De Empleo página 24

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
EN
9. Adjusting the handlebar to the correct height
– figures 14-15
To adjust the handlebar (1) to the correct height, use your thumbs
to press down the silver height adjusting buttons (2) on the inside of
the handlebar and pull or push the bar to the required height.
10. Unfolding the cot – figures 16-24
a. P ull one of the spring clips towards the head end and pull
the other strap towards the foot end. The cot is now unfolded
and taut.
b. A ttach the sun hood (22) by sliding the black hood clamps
(19) at the ends of the sun hood frame (19)
into the connectors on the cot frame (23).
c. Z ip the sun hood fabric to the head end of the cot to secure
it.
d. P lace the special hypoallergenic breatable mattress in the cot
with the smooth side facing down.
e. A ttaching the safety bar (carrying handle) (17).
Push the safety bar into the appropriate slots on either side of
the cot frame until they click into place.
To easily lift your child in and out of the seat detach the
safety bar on one side and turn it out of the way.
f.
P erform these actions in reverse order (e to a) to collapse the
cot.
24
|
instruction manual
7. manual_NL_UK_DE_ES_IT_CR_FR_jan 2015.indd 24
11. Placing the cot on the chassis – figures 25-26
There is only one way to place the cot to the chassis (5). Place the
cot so that you look into it when standing behind the handlebar.
Slide the cot into the connectors (8) until you hear a click.
Handy tip: Y ou can also use the cot without the chassis. Remove
the cot from the chassis and place it
on a level, firm and dry surface. Inspect the safety bar
(carrying handle) and underside
of the cot regularly for any signs of any wear and tear.
12. Placing the seat on the chassis – figures 27-28
Slide the seat into the connectors (8) on the chassis and push until
you hear a click.
13. Seat – figures 29-35
a. F ix the seat cushion using the velcro strips.
b. F asten the seat fabric by zipping it closed from right
to left.
c. T hen attach it to the footrest by zipping the bottom
of the fabric to the footrest from right to left.
d. A ttach the sun hood. See 6b and c.
e. A ttach the safety bar (carrying handle). See 6e.
03-03-15 17:17

Publicidad

Tabla de contenido
loading

Tabla de contenido