How To Operate - PROZIS o-volt Manual Del Usuario

EN

HOW TO OPERATE

1. Connect the USB cable to an USB power source (to
optimize the output connect the USB cable to an AC
adaptor that supports fast-charging).
If the connection is successful, the LED will switch
to red.
10
USB Port
2. Place the mobile device on
the Qi charging surface.
Make sure the center of the
device is aligned with the
center of the Qi charging
surface. Charging will begin
on contact. The LED light
will switch to blue when
charging is ongoing. If you
place a non-compatible
mobile device on the
charging surface, the LED
will flash red and blue.
NOTES:
Any mobile device protective covers may interfere with the
charging process. In this case, the protective cover must
be removed. The device supports fast wireless charging.
To begin fast wireless charging, place a mobile device that
supports fast wireless charging on the charging surface.
EN
11