Residual Risks; Assembling Instructions; Connector Nozzle; Locking Button - Deltafox DG-CLB 2013 Traducción Del Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
• Do not operate the device in poor
weather conditions, especially not in
rain or storms.

9) RESiDUAL RiSKS

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer
periods of time or if the unit is not
held or maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the
risk of serious or lethal injuries,
we recommend that persons with
medical implants consult their doc-
tor and the manufacturer of their
medical implant before operating
the machine.
Warning! observe the safety
information in the operating in-
structions for your
20V DELTAFOX Battery System
series rechargeable battery.

Assembling instructions

Do not insert the battery until
the appliance is fully assembled.
Risk of injury!
Unit assembly:
Join the lower part of the blowpipe (1a) to-
gether with the upper part of the blowpipe
(1b). When doing so, the opening in the
lower blowpipe (1a) locks into place above
the nose of the upper blowpipe. Now slide
the preassembled blowpipe (1) onto the
connector nozzle (2) on the motor housing
(4) until it locks into place.
In order to attach the blower pipe (1), the
locking button (3) must be pressed down.
There is a distinct, audible clicking sound
when the blower pipe has attached to the

locking button.

Operation

Please observe local regulations
concerning noise protection.
Checking the battery charge
level
The battery's (
indicated by the charge state indicator
(
10).
The LEDs indicate the battery's charge
level.
To do this, press and hold the charge level
indicator (
10a) on the battery (
red-yellow-green => Battery fully
red and yellow => Battery half charged
red
=> Battery needs
7) charge level is
charged
to be charged
GB
7).
23

Publicidad

Tabla de contenido
loading

Tabla de contenido