User Characteristics - Ariston DK 10ST (IX) Manual De Instrucciones

To avoid all risk, if the power cable becomes damaged,
it must only be replaced by the manufacturer,
by an authorised service centre, or by a qualified
electrician.
Adaptation to various types of gas (Fig. 5)
Should the appliance be pre-set for a different type of
gas than that available, proceed as follows:
• replace the injectors (Fig. 5) with the corresponding
type of gas to be used (see table "Uses
characteristics").
• to adjust to the minimum, use a screwdriver on the
screw placed on the tap (Fig. 6) after turning the tap
to its minimum position. For LPG (butane/propane)
screw tight

USER CHARACTERISTICS

GAS BURNERS
FEED
TYPE PRESSURE mbar
NORM.
natural gas G20 20
liquefied gas G30/G31 28-30/37
Fig. 6
BURNER Ø INJECTORS
1/100 mm
fast 129
auxiliary 77
wok 3 141
fast 87
auxiliary 50
wok 3 94
wok C3 only
THERMAL CAPACITY
NOMINAL CONSUMPTION
W
3000 286
1000 95
3500 333
3000 218
1000 73
3500 254
GB
Fig. 5
7