Function Description; Overview; Scope Of Delivery; Operation - Deltafox DG-EHT 6051 Traducción Del Manual De Instrucciones Original

in order to avoid overstressing of
the machine. Damages caused by
cutting with blunt blades are not
covered by the guarantee.

Function Description

The electric hedge trimmer is driven by
an electronic motor. The equipment is
double-insulated for safety and does not
require earthing.
The hedge trimmer is equipped with a
double-sided safety cutter bar. When
cutting, the blades move backwards and
forwards in linear motion. The impact pro-
tection on the tip of the cutter bar prevents
unpleasant recoils should the trimmer
come into contact with walls, fences and
so on.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and bri-
ars.
Please note the following descriptions for
the function of the operating components.
The illustration how to handle the
appliance can be found on page 2.

Overview

1 Power cable
2 Handle
3 ON / OFF switch
4 Strain relief
5 Vents
6 Loop grip with deadman switch
7 Hand protection
8 Safety blade
9 Blade protection

Scope of delivery

Carefully unpack the appliance and check
that it is complete:
- Hedge trimmer with cutter assembled
- Blade guard
- Instruction Manual

Operation

Wear suitable clothing and work
gloves when working with the
equipment. Ensure that the equip-
ment is functional before each
use. The On/Off switch and the
safety switch must not be held
closed. They must switch off
the motor when on is released.
Should a switch be damaged,
stop working with the equipment.
Ensure that the mains voltage
value matches the label on the
equipment.
Note noise protection and local
specifications. The use of the
equipment on certain days (e.g.
Sundays and national holidays), at
certain times of day (lunch times,
night time quiet periods) or in spe-
cial areas (e.g. health resorts, clin-
ics etc.) is restricted or forbidden.
The blades continue to move for
a while after the equipment is
switched off. Allow the blades to
come to a complete standstill. Do
not touch the moving blades and
do not brake them. Risk of injury!

Switching On and Off

1. For tension relief of the cable,
form a loop of the end of the
GB
21