Tabla de contenido
Publicidad
EN
2.2. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A
messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use
common sense when working with the device.
b)
If you discover damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
c)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
f)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
g)
Use the device in a well-ventilated space.
h)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
i)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
j)
Keep packaging elements and small assembly parts
in a place not available to children.
k)
Keep the device away from children and animals.
REMEMBER! When using the device, protect
children and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
e)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
f)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed better
and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
8
d)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
h)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
i)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
j)
Do not move, adjust or rotate the device in the
course of work.
k)
Do not leave this appliance unattended while it is in
use.
l)
Clean the device regularly to prevent stubborn grime
from accumulating.
m)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
n)
Before adjusting, replacing accessories, or storing
the appliance, unplug the appliance from the
power source. This will decrease the possibility of
accidentally switching it on.
o)
Do not run the device when empty.
p)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
q)
Do not dive parts of the body or parts of living things
(animals, plants) into the basin, especially when the
unit is in operation.
r)
Avoid the contact with eyes or skin of the detergents
used.
s)
Do not inhale the detergent.
t)
Do not use the device if it´s empty. The tank of the
device must be filled with minimum level of the
cleaning liquid in accordance with the below table:
u)
Do not fill the tank with water above 50°C.
v)
Do not place items that have been in contact with
acids, chloride ions and other aggressive substances
in the basin.
w)
Do not use flammable liquids or other chemicals
containing chloride ions, or leading to their
release (such as some disinfectants, detergents or
dishwashing liquids).
x)
During the heating of the cleaning liquid, be sure
tostir the liquid every 15 minutes so as to avoid
overheating and boiling.
y)
During ultrasonic cleaning, you will hear the
soundsof cavitation. When using the device for a
long time, please wear hearing protection within a
radius of 2 m around the device.
z)
The cleaning fluid heats up when it is used long.
Watch the temperature if you clean objects sensitive
to heat.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The ultrasonic cleaner is a device used to remove
operational dirt from surfaces, tools and functional parts
of machines.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
5
4
6
2
1
3
7
1.
Handle
2.
Cover
3.
Control panel (varies depending on model)
4.
Power socket and fuse socket
5.
Portable rack
6.
Tub
7.
Drain plug
3.2 PREPARING FOR USE
APPLIANCE LOCATION
Temperatura otoczenia nie może przekraczać 40°C The
temperature of environment must not be higher than 40°C
and the relative humidity should be less than 85%. Ensure
good ventilation in the room in which the device is being
used. There should be at least 10 cm distance between each
side of the device and the wall or other objects. The device
should always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach
of children and persons with limited mental and sensory
functions. Position the device such that you always have
access to the power plug. The power cord connected to the
appliance must be properly grounded and correspond to
the technical details on the product label.
ASSEMBLING THE APPLIANCE
1.
Unpack the device.
2.
Check that the device is undamaged and that
all components are included in the set. If it is
damaged or any elements are missing, contact the
manufacturer.
3.
Place the portable rack into the tub
9
EN
4.
Connect the power cable to the device socket.
5.
Place the lid on top of the device to cover the tub
3.3. DEVICE USE
4
1
3
2
1.
Temperature knob
2.
Heating operation indicator
3.
Timer knob
4.
Ultrasonic cleaning indicator
HOW TO USE THE DEVICE
a)
Fill the tub with cleaning solution.
b)
Place the items to be cleaned in a portable rack and
place them in the tub.
c)
Connect the device to a power source.
d)
Turn the [3] knob to:
• "ON" for continuous operation mode.
• Time value for periodic operation mode.
The water will start bubbling when the bath is ready.
PLEASE NOTE: Do not use the device for more than
an hour.
e)
Turn the dial to the selected temperature position.
f)
Turn the dial to the "OFF" position to turn off the
device/heating.
g)
Empty the tub and clean the device inside and
outside with a dry cloth.
PLEASE NOTE: Do not empty the tub until the water
temperature has dropped to room temperature.
3.4. CLEANING AND MAINTENANCE
a)
Unplug the mains plug and allow the device to cool
completely before each cleaning, adjustment or
replacement of accessories, or if the device is not
being used.
b)
Use only non-corrosive cleaners to clean the surface.
c)
After cleaning the device, all parts should be dried
completely before using it again.
d)
Do not spray the device with a water jet or submerge
it in water.
e)
Do not allow water to get inside the device through
vents in the housing of the device.
f)
The device must be regularly inspected to check its
technical efficiency and spot any damage.
g)
Use a soft cloth for cleaning.
h)
Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
Publicidad
Tabla de contenido
