Timex W-209 Manual De Instrucciones

Extended Warranty
Available in U.S. only.
You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business
hours. Payment must be made within 30 days of purchase. Name, address, telephone number,
purchase date, and 5-digit model number required. You can also mail a check for $5 to:
Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex
• Time with 12- or 24-hour format
• Date with MM-DD or DD.MM format
• 3 time zones
• Optional hourly chime
• 100-hour chronograph with memory for 30 laps/splits
• 24-hour countdown timer (count down and stop or repeat)
• Occasion reminders
• 3 daily/weekday/weekend alarms with 5-minute backup
• Customizable mode set (Select "HIDE" for unwanted modes – they are removed from mode sequence)
• INDIGLO
® night-light with NIGHT-MODE
MODE
Press repeatedly to step through modes: Chrono, Timer, Occasion, Alarm 1, Alarm 2, and Alarm 3.
MODE
Press to exit current mode and return to Time mode.
Button functions shown with secondary functions in parentheses. While setting, button functions are
shown on display.
To set time, date, and options:
1) With time and date showing, press and hold
2) Current time zone (1, 2, or 3) flashes. Press
NEXT
3) Press . Hour flashes. Press
NEXT
4) Press . Minutes flash. Press
NEXT
5) Press . Seconds flash. Press
NEXT
6) Press . Month flashes. Press
NEXT
7) Press . Day flashes. Press
NEXT
8) Press . Year flashes. Press
NEXT
9) Press to set options. Press
DONE
Press at any step to exit and save settings. Available options are 12- or 24-hour time format,
MM-DD or DD.MM date format, hourly chime beep for button presses, mode customization set (Select
"HIDE" for unwanted modes – they are removed from mode sequence).
If you hide a mode, you can turn it back on later using procedure above.
START·SPLIT
Press once and hold to see 2nd time zone. Press
time zone. Continue to hold button for 4 seconds to switch to displayed time zone.
STOP·RESET
Press and hold
and immediately press and hold again to see subsequent occasions.
This mode provides a chronograph (stopwatch) function. Press
START·SPLIT
To start, press
seconds up to 100 hours. Stopwatch icon w flashes to indicate chrono is running.
STOP·RESET
To stop, press
START·SPLIT
To resume, press
When chrono is already running, chrono continues to run if you exit mode. Stopwatch icon w appears in
TIME mode.
While chrono is running, press
number.
Lap and split times are stored in memory until a new workout is started (chrono started from zero).
To recall split times during or after workout, press
DONE
Press to exit.
To set display format, press
DONE
format. Press to exit.
NOTES:
• When a split is taken, times are frozen on the display for 10 seconds. Press
and show running chrono immediately.
NEXT
• Press to switch between recall and format setting.
Timer mode provides a countdown timer with alert. Press
To set countdown time:
SET·RECALL
1) Press
NEXT
2) Press . Minutes flash. Press
NEXT
3) Press . Seconds flash. Press
NEXT
4) Press . Action at end of countdown flashes. Press + or – to select STOP or REPEAT, indicated by
hourglass icon with arrow i .
DONE
5) Press at any step when done setting.
START·SPLIT
To start timer, press
icon H flashes to indicate timer is running.
To pause countdown, press
To resume countdown, press
Watch beeps and night-light flashes when countdown ends (timer reaches zero). Press any button to
silence. If REPEAT AT END was selected, timer repeats countdown indefinitely.
Timer continues to run if you exit mode. Hourglass icon H appears in Time mode.
The watch has three alarms. Press
To set alarm:
SET·RECALL
1) Press
NEXT
2) Press . Minutes flash. Press
NEXT
3) Press . AM/PM flashes if in 12-hour time format. Press
NEXT
4) Press . Alarm day setting flashes. Press
DONE
5) Press at any step when done setting.
To turn alarm on/off, press
Alarm clock icon a appears when alarm is on in this mode and in Time mode.
When alarm sounds, night-light flashes. Press any button to silence. If no button is pressed, alarm will
sound for 20 seconds and repeat once five minutes later.
Each of the three alarms has a different alert melody.
Register your product at
www.timex.com
W-209
THANK YOU FOR PURCHASING YOUR TIMEX
Extend your warranty for an additional 4 years from date of purchase for $5.
FEATURES AND BASIC OPERATION
® feature
•
+ –
or to change hour (including AM/PM); hold button to scan values
+ –
or to change minutes
+ –
or to set seconds to zero.
+ –
or
+ –
or to change day.
+ –
or to change year.
+ –
or to change value and then press
next
to see upcoming occasion (see description of Occasion mode). Release
CHRONOGRAPH
. Chrono counts up by hundredths of a second up to one hour, then by
. Stopwatch icon w freezes to indicate chrono is stopped.
, or to reset (clear) chrono, press and hold
START·SPLIT
LAP 1 = 7.11 LAP 2 = 7.50
SPLIT 1 = 7.11
SPLIT 2 = 15.01
SET·RECALL
while chrono is reset. Then, press
+
. Hours flash. Press
+ –
or to change minutes.
+ –
or to change seconds.
. Timer counts down every second from countdown time. Hourglass
STOP·RESET
. Hourglass icon H freezes to indicate timer is stopped.
START·SPLIT
, or to reset countdown, press
MODE
repeatedly until ALM 1, ALM 2, or ALM 3 appears.
+
. Hour flashes. Press
+ –
or to change minutes.
START·SPLIT
.
170-095004 NA
TIME
SET·RECALL
.
+ –
or to select time zone to set, if desired.
to change month.
START·SPLIT
MODE
to take a split. Lap and split times will be displayed with lap
LAP 3 = 7.08
SPLIT 3 = 22.09
SET·RECALL
. Then, press
TIMER
MODE
repeatedly until TIMER appears.
–
or to change hours; hold button to scan values.
ALARM
–
or to change hour; hold button to scan values.
+
or
+ –
or to select DAILY, WKDAYS, or WKENDS.
WATCH.
®
® watch.
•
•
NEXT
to go to
twice and hold to see third
to go to Chrono mode.
STOP·RESET
.
LAP 4 = 7.30
SPLIT 4 = 29.39
+ –
or to step through splits.
+ –
or to select desired
MODE
to release display
STOP·RESET
.
–
to change.
next
option.