Assembling the garden arch
Assembling the garden arch
WARNING!
Risk of suffocation!
The garden arch includes screws and other small parts. They
may cause suffocation if swallowed or inhaled.
− Do not allow children to assemble the garden arch and
play with the screws and other small parts.
It is recommended to assemble the garden arch on a flat surface before
setting it up at the final location.
1. Lay the sections
labels (A–H) on the sections (see fig. B).
Each section of the garden arch is labelled (A–H) with a sticker. The stickers
can be removed after the assembly.
2. Use three screw
Manually tighten the screws to ensure you have assembled the garden arch
correctly.
3. Tighten all screws with the provided spanners
been connected.
The garden arch has now been assembled (see fig. D).
To disassemble the garden arch, reverse the steps above.
Installing the garden arch
For secure footing, the garden arch should be securely anchored in
the ground by at least 12 inches (30 cm).
− To install the garden arch, simply insert the ground spikes
ground.
− For best anchorage, embed the ground spikes in a concrete base.
10
1
of the garden arch on a flat surface according to the
2
and nuts
3
(see fig. C) to connect each section.
6
when all sections have
7
into the